This is the boot output of a Cisco SAMI card (WS-SVC-SAMI-BB-K9) booting the Cisco WiMAX ASN gateway code.

System Bootstrap, Version 12.2[121],
Copyright (c) 1994-2008 by cisco Systems, Inc.
Slot 3 : Running DEFAULT rommon image ...

.ACE platform with 1048576 Kbytes of main memory

.Loading disk0:c7svcsami-w1ik9s-mz.124-24.YG2.bin.  Please wait ....

Uncompressing Linux...
Starting the kernel...
INIT: version 2.78 booting
Mounting Second Ramdisk ....
Second Ramdisk successfully mounted
Starting periodic command scheduler: cron.
Configuring network interfaces.
CF dump: Register callback functions
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
/dev/cf: 8 files, 25804/63414 clusters
FAT FS is ok
Compact Flash size 1014624(in 1k blocks) ...
Core file size 204800
Available free size in cf is 601760 (in 1k blocks) ...
set_coredump 2.11, 12 Mar 2005, FAT32, LFN
first_cluster = 0x5102 num_cluster = 0x40 (64)
inserting procfs
inserting isan_kthread
inserting wiremod
inserting klib
inserting resdrv
inserting tlv
inserting sse
inserting kpss
inserting sdwrap
creating sdwrap device
inserting klm_tl
creating tl device
inserting klm_scp
inserting klm_mts
creating mts0 device
creating mtscfg0 device
inserting utaker
creating utaker0 device
creating utaker1 device
inserting sysmgr-hb
creating sysmgr-hb device
inserting modlock
creating modlock device
inserting bufmgr
inserting pkt_fifo
inserting encdec
creating encdec device
inserting pseudo
inserting drammap mod
creating drammap device
inserting ixp_dnld
creating ixp_dnld device
inserting sysdrv
creating sysdrv device
New registry installed.
INIT: Entering runlevel: 3
inserting i2c module
inserting ssa driver
inserting cde driver
inserting bf_dnld driver
inserting pfm_drv driver
inserting regaccess driver
inserting bf_nvram driver


Firmware compiled 24-Mar-08 10:38 by fsunaval Build [25600]

ACE Daughter boards DB1 present DB2 present.
downloading fpga to cde 1

Read 3262456 bytes from ./cde1_core.bit
FPGA Date: 2009/ 2/28 Time:  1:51:32

CDE 1 download successful
downloading fpga to cde 2

Read 2377744 bytes from ./cde2_core.bit
FPGA Date: 2007/ 8/15 Time: 20:59:47

CDE 2 download successful
FPGA Programming Done

CDE 1 revision ID 0405
CDE 2 revision ID 0402
enabling cde 0 interrupts
finished CDE setup
inserting bouncerload module and device
Extracting Image Two if available
tar: BOUNCER_RM.bin: time stamp 2010-04-13 20:21:40 is 324505249 s in the future
tar: kabob.bit: time stamp 2010-04-13 20:21:39 is 324505248 s in the future
tar: l2_bridging_enabled: time stamp 2010-04-13 20:21:39 is 324505248 s in the future
tar: qnx.bin: time stamp 2010-04-13 20:21:40 is 324505249 s in the future
tar: svcsami-w1ik
9s-mz: time stamp 2010-04-13 20:21:38 is 324505247 s in the future
tar: sw_ver.txt: time stamp 2010-04-13 20:21:37 is 324505246 s in the future
Extracted image two successfully
Finished extracting IOS-PPC image and other binaries
Configuring NP 1 Memory
IXP RDRAM memory size 600
00000
IXP SRAM memory size 800000
Configuring NP 2 Memory
IXP RDRAM memory size 60000000
IXP SRAM memory size 800000
.............................
Downloading NP 1 Image
... 0x2b0c7c (2821244) bytes downloaded

.............................
Downloading NP 2 Image
... 0x2b0c7c (2821244) bytes downloaded

Loading Nitrox driver.
Writing register at address 3838 with e00
BEGIN N2_LOADER
size = 8148
END_N2_LOADER
Ctx memory range(0x0000000-0x10000000)
Cleared 262144 1024-byte blocks in 5 requests.
Doing...  
Writing register at address 3898 with 1
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Doing...  \n
Writing register at address 4b28 with 22

N2 SPI INIT PROGRAM.

Initializing Nitrox SPI1
configuring using falling clocks
Initializing CDE SPI registers
Nitrox init completed.
inserting IPCP klm
inserting IPCP klm
inserting cpu_util klm
Waiting for 3 seconds to enter setup mode...
inserting kaboom module and device
inserting kabob module and device
inserting cisco ipc klm
inserting cisco rfs klm
Initializing daughtercards
 daughtercard 1 present
 daughtercard 2 present
downloading kabob on daughtercard 1
 Daughtercard 1 kabob fpga image downloaded successfully
downloading kabob on daughtercard 2
 Daughtercard 2 kabob fpga image downloaded successfully
taking daughtercard 1 kabob out of reset
taking daughtercard 2 kabob out of reset
enabling kabob 1 pkt drop
enabling kabob 1 FFC
enabling kabob 2 pkt drop
enabling kabob 2 FFC
enabling kabob 1 32-bit fifo
enabling kabob 1 QinQ
Clearing any existing cumulative stats
enabling kabob 2 32-bit fifo
enabling kabob 2 QinQ
Clearing any existing cumulative stats
initializing cde for daughtercards
 Itasca Daughtercard 1 - present 2 - present.
Destination index copy enabled in CDE
Starting Kabob Stats cumulative counter
Now enabling interrupts from LCP to CPU for daughtercard 1
Now enabling interrupts from CPU to LCP for daughtercard 1
Now enabling interrupts from LCP to CPU for daughtercard 2
Now enabling interrupts from CPU to LCP for daughtercard 2
taking ppcs on daughtercard 1 out of reset
Daughtercard 1 console is set to default proc 3
taking ppcs on daughtercard 2 out of reset
Daughtercard 2 console is set to default proc 6
Finished daughtercard initialization
programming rommon to ppc flash
PPC Rommon Upgrade: Checking whether upgrade is required
PPC Rommon Upgrade: Existing Rommon for Processors 3-8 is identical. No need to upgrade
Waiting for Xscale/ME to come up...
Waiting for NP handshake . Done
Done.

Starting sysmgr processes.. Please wait...Done!!!

switch login: