Tech Messages | 2008-01-01

A special extended edition of Tech Messages for 2007-12-24 through 2008-01-01:

• A Small Batch of The Boards are Affected by Contamination Under a Connector Soldered to the Board [Cisco ONS 15400 Series] – Cisco Systems
  The Boards will need to be replaced through the regular Cisco RMA Process. (CCO login required)
• 15454-OPT-PRE, 15454-OPT-BST, 15454E-OPT-PRE and 15454E-OPT-BST (VendorID 1025) – Possible Traffic Hit During Software Upgrade – False Equipment Failure Alarm – Cisco Systems
  If the problem occurs, perform a non-traffic affecting reset using the CTC craft terminal on the affected amplifier to clear the alarm. (CCO Login Required)
• MCS-7825-H3 Install Fails to Configure RAID 1 [Cisco 7800 Series Media Convergence Servers] – Cisco Systems
  RAID 1 is the default configuration for Cisco Unity and Cisco Unity Connection servers. Lack of Raid 1 configuration during the initial installation of this server will result in a less fault-tolerant deployment. (CCO login required)