Articles tagged with cisco

  1. Cisco IOS Interface Load-Balancing

    Posted on in Networking

    ConnectorsLet me start by saying this article is not about server load-balancing. That's a different topic, and I apologize if that's what you were looking for. That said, interface load-balancing is an interesting topic and one that comes up quite frequently.

    A time will come when it becomes necessary to …

  2. Defining Management IPs in Cisco IOS

    Posted on in Networking

    Cisco LogoOn most networks, there is a subset of IP addresses assigned to "management" hosts. These hosts might be the workstations of network administrators or monitoring servers. One of the keys to network security is restricting who has access to the device. Generally, we think of access restriction in terms of …

  3. Username / Password Authentication in Cisco IOS

    Posted on in Networking

    The last thing I want to do when some network administrator leaves my organization is change all the login passwords on the Cisco network devices. (For now, let's just assume the administrator in question didn't know the enable secret.) If you have relatively few machines, it's easy to setup username …

  4. Easy Traffic Shaping in Cisco IOS

    Posted on in Networking

    If you followed my recent Cisco Catalyst rate-limiting post, you already know that policing traffic on a Cisco Catalyst switch requires a bit of thought. Mainly, you have to do a bit of calculating to determine the best bucket size for your application. The good news is that achieving the …

  5. Cisco Catalyst Configuration Using Cluster Commands

    Posted on in Networking

    If you work on a fairly spread out network (or have remote clients), you might be managing Cisco Catalyst switches that are far, far away. For a long time, I thought the only option was to have someone on site to pre-configure the switch just enough to get it on …

  6. Send Cisco Debug Messages to Syslog

    Posted on in Networking

    Sending log messages from your Cisco network equipment to a centralized syslog server is a fairly normal activity. Most of the time, this setup works fine and there's no reason to do anything out of the ordinary. Occasionally though, you might need to run a debugging session over an extended …

  7. The Annoyance of 'show config'

    Posted on in Networking

    How many times has this happened to you?

    SLAP#write memory
    startup-config file open failed (Device or resource busy)
    

    If you work in an environment where multiple users have enable access on Cisco devices, you've probably seen it more than once. This particular error is caused when another user has …

Slaptijack's Koding Kraken